Acura 3.5 RL Manual page 1386

Rear Seat Belt
Removal/Installation (cont'd)
3. Installation is the reverse of the removal procedure.
NOTE:
• Check that the retractor locking mechanism func-
tions as described on page 24-8.
• Before installing the anchor bolt, make sure there
are no twists or kinks in the rear seat belt.
Upper anchor bolt construction:
Retractor bolt construction:
Seat belt buckle/Center belt tongue:
1. Remove the rear seat cushion (see
2. Remove the center anchor bolts, then remove the
seat belt buckles and center belt tongue.
Center anchor bolt construction:
3. Installation is the reverse of the removal procedure.
NOTE: Before attaching the rear seat-back and rear
seat cushion, make sure there are no twists or kinks
in the center belts.
section 20).