Acura 3.5 RL Manual page 982

Rear Seat
Seat Cover Replacement (cont'd)
Seat cushion cover:
1. Remove the seat cushion (see page 20-67).
2. Loosen the seat cushion cover by releasing all the
clips.
SEAT CUSHION
COVER
3. Pull back the edge of the seat cushion cover all the
way around, release the clips, and remove the seat
cushion cover.
SEAT CUSHION
COVER
CLIP
CLIPS
4. Installation is the reverse of the removal procedure.
NOTE:
To prevent wrinkles when installing a seat cush-
ion cover, make sure the material is stretched
evenly over the pad before securing the clips.
Replace the released clips with new ones.
NEW CLIP
SEAT
COVER
ROD
(Cover side)
WIRE
(Pad side)
UPHOLSTERY RING PLIERS
(Commercially available)
PAD