Acura 3.5 RL Manual page 829

Pump Motor Replacement
The modulator unit contains high-pressure
brake fluid. Be sure to relieve system pressure unit
before removing the pump motor.
1. Relieve system pressure (see page 19-97).
2. Remove the modulator unit (see page 19-99).
3. Replace the pump motor.
O-RING
Replace.
PUMP MOTOR
4. Perform modulator unit installation (see page 19-100).
MODULATOR UNIT
8 mm FLANGE BOLT
Replace.
NOTE: Use 8 mm bolts
in the pump motor set.
15 N-m (1.5 kgf-m, 11 Ibf-ft)
Reservoir Replacement
1. Remove the modulator unit (see page 19-99).
2. Replace the reservoir.
O-RING
Replace.
O-RING
Replace
3. Perform modulator unit installation (see page 19-100).
RESERVOIR
Replace.
O-RING
Replace.
JOINT
Replace.