Show Qos - Cisco MDS 9000 series Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show qos

To display the current QoS settings along with a the number of frames marked high priority, use the show
qos command.
Syntax Description
class-map
name class-name
dwrr
policy-map
name policy-name
service policy
interface fc
slot/port
vsan vsan-id
statistics
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.3(1)
Usage Guidelines To access all but the statistics option for this command, you must perform the qos enable command.
Examples The following example displays the contents of all class maps.
switch# show qos class-map
qos class-map MyClass match-any
qos class-map Class2 match-all
qos class-map Class3 match-all
OL-8413-07, Cisco MDS SAN-OS Release 3.x
show qos {class-map [name class-name] | dwrr | policy-map [name policy-name] | service policy
[interface fc slot/port | vsan vsan-id] | statistics}
Displays QoS class maps.
Specifies a class map name. The maximum length is 63 alpha-numeric
characters.
Displays deficit weighted round robin queue weights.
Displays QoS policy-maps.
Specifies a policy map name. The maximum length is 63 alpha-numeric
characters.
Displays QoS service policy associations.
Specifies a Fibre Channel interface.
Specifies a VSAN ID. The range is 1 to 4093.
Displays QoS related statistics.
Modification
This command was introduced.
match dest-wwn 20:01:00:05:30:00:28:df
match src-wwn 23:15:00:05:30:00:2a:1f
match src-intf fc2/1
match src-intf fc2/14
match src-wwn 20:01:00:05:30:00:2a:1f
Cisco MDS 9000 Family Command Reference
show qos
22-269