Service Cpu-Utilization - Cisco Sx350 Cli Manual

System Management Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Parameters
connection—(Optional) Specifies the connection number. (Range: 1-4
connections.)
Default Configuration
The default connection number is that of the most recent connection.
Command Mode
Privileged EXEC mode
Example
The following command switches to open Telnet session number 1.
switchxxxxxx> resume
1

62.5 service cpu-utilization

To enable measuring CPU utilization, use the service cpu-utilization Global
Configuration mode command. To restore the default configuration, use the no
form of this command.
Syntax
service cpu-utilization
no service cpu-utilization
Parameters
This command has no arguments or keywords.
Default Configuration
Measuring CPU utilization is enabled.
Command Mode
Global Configuration mode
62
1188