Ftp Operation Configuration Example - H3C SR6600-X Configuration Manual

[DeviceA] display nqa history admin test1
NQA entry (admin admin, tag test) history records:
Index
1
The output shows that it took Device A 62 milliseconds to translate domain name host.com into an IP
address.

FTP operation configuration example

Network requirements
As shown in
to the FTP server. The login username and password are admin and systemtest, respectively. The file to
be transferred to the FTP server is config.txt.
Figure 10 Network diagram
Configuration procedure
# Assign each interface an IP address. (Details not shown.)
# Configure static routes or a routing protocol to make sure the devices can reach each other. (Details not
shown.)
# Create an FTP operation.
<DeviceA> system-view
[DeviceA] nqa entry admin test1
[DeviceA-nqa-admin-test1] type ftp
# Specify the URL of the FTP server.
[DeviceA-nqa-admin-test-ftp] url ftp://10.2.2.2
# Specify 10.1.1.1 as the source IP address.
[DeviceA-nqa-admin-test1-ftp] source ip 10.1.1.1
# Configure the device to upload file config.txt to the FTP server.
[DeviceA-nqa-admin-test1-ftp] operation put
[DeviceA-nqa-admin-test1-ftp] filename config.txt
# Specify the username for the FTP operation as admin.
[DeviceA-nqa-admin-test1-ftp] username admin
# Specify the password for the FTP operation as systemtest.
[DeviceA-nqa-admin-test1-ftp] password simple systemtest
# Enable the saving of history records.
[DeviceA-nqa-admin-test1-ftp] history-record enable
[DeviceA-nqa-admin-test1-ftp] quit
# Start the FTP operation.
[DeviceA] nqa schedule admin test1 start-time now lifetime forever
Response Status
62 Succeeded
Figure 10, configure an FTP operation to test the time required for Device A to upload a file
Time
2011-11-10 10:49:37.3
42