Editing An Existing Channel - Christie CP2309-RGB User Manual

Field Name
ILS File
2D Laser File
3D Laser File
2D MCGD File
3D MCGD Left Eye File
3D MCGD Right Eye File
TCGD File
Screen File
Gamma File
Clut File
3D File
Source File
Christie Pureformity
™
Color Correction File
Warp File
4. Select Save.

Editing an existing channel

Edit an existing channel when the parameters of the input device change.
1. In the left navigation menu, select Channel Setup.
2. In the left pane, select a channel.
3. Edit the channel settings.
CP2309-RGB User Guide
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Description
• 3D Frame Interleaved: For input that contains left eye data followed by
right eye data.
• 3D Frame Interleaved Inverted: For input that contains right eye data
followed by left eye data.
• 3D White Line/Blue Line: For input that includes metadata describing the
3D encoding.
• 3D White Line/Blue Line Inverted: For inverted input that includes
metadata describing the 3D encoding.
• 3D Line Interleaved: The left eye and right eye data are sent on
alternating lines.
3D Sync Input Mode is not required when using the Christie IMB.
For GDC IMB devices, the recommended setting is 3D Line Interleaved.
The ILS file associated with the channel.
The 2D laser file associated with the channel. Any changes made to the laser
file settings are applied to all channels that use this laser file.
The 3D laser file associated with the channel. Any changes made to the laser
file settings are applied to all channels that use this laser file.
The Measured Color Gamut Data file associated with the 2D image.
The Measured Color Gamut Data file associated with the left 3D image.
The Measured Color Gamut Data file associated with the right 3D image.
The Target Color Gamut Data file associated with the channel.
The screen type, masking, cropping, and lens settings for the channel.
The gamma correction required for the proper tonal range of the source
material.
Applies a 3D color cube for increased color accuracy.
The 3D settings file associated with the channel.
The resolution and aspect ratio for the channel.
The color correction file associated with the channel. The default value is
Bypass.
The warp file associated with the channel. The default value is Bypass.
Working with channels
47