Editing A Channel Setup - Christie Roadster S+12K Setup Manual

Editing a Channel Setup 
CHANNEL EDIT — STEP 1
CHANNEL EDIT — STEP 2
CHANNEL EDIT — STEP 3
Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
020-100342-02 Rev. 1 (04-2011)
TO DELETE MULTIPLE CHANNELS
and press to go to the Channel Copy/Delete submenu. Select "Delete Unlocked
Func
Only" and press to delete all unlocked channels. Or select "Delete All Channels"
Enter
to delete all channels, even those that are locked. In either case, the current channel
will remain but will be redefined from projector defaults.
NOTE: For any deletion, a confirmation box appears to confirm that you want to
delete. Select "Cancel" if you don't want to delete after all.
The basic setups that describe how and where a channel can be accessed are listed in
the Channel Setup menu. These channel setups can be edited at any time in the
Channel Edit submenu.
From the presentation level press
Channel Setup menu, press
and press . The Channel Setup menu will appear.
Enter
To edit parameters shown in the Channel Setup menu, select the relevant channel and
press . The Channel Edit menu will appear similar to the sample shown in Figure
Enter
3.13.
Figure 3.13. Channel Edit Menu (
If desired, review and/or edit the following channel setups in the Channel Edit menu:

An alpha-numeric label can be defined and/or changed here.
CHANNEL NAME:
Channel names can be up to 12 characters in length.

CHANNEL NUMBER:
NOTES: 1) If you enter a channel number that already exists, a dialog message
appears indicating that this number is already in use–assign a different channel
number. 2) You can define 50 channels.
Figure 3.12. Deleting a Channel
, highlight any channel in the Channel Setup menu
to display the main menu. To display the
Menu
, or move the highlight to the Channel Setup option
A two-digit channel number can be changed here.
Operation
)
SAMPLE
3-21