Editing The 3D Flat 1998 X 1080 Channel; Editing The 3D Scope 2048 X 858 Channel - Christie CP2208 User Manual

Editing the 3D flat 1998 x 1080 channel

1. Tap Menu > Channel Setup.
2. Select 3D Flat 1998x1080 in the Channel Name list.
3. Tap Config 1 in the left pane and edit these settings:
a. Select 292-Dual in the Input list.
b. Select YCrCb 4:2:2 10 bits x2 in the Data Format list.
c. Select 1998x1080 1.85 Flat in the Source File list.
d. Select Flat in the Screen File list.
4. Tap Config 2 in the left pane and edit these settings:
a. Select 3D Onsite in the Measured Color list. If this option is not available, see
a measured color gamut data file
b. Select DC28_DCIXYZE_314_351 in the Target Color list.
c. Select YCxCz Inverse ICT in the Color Space list.
d. Select Gamma 2.6 in the Gamma list.
e. Select Linear_9x9x9 in the LUT-CLUT list.
5. Tap 3D Control in the left pane and edit these settings:
a. Select Line Interleave in the 3D Sync Input Mode list.
b. Select a frame rate suitable to your 3D system in the Frame Rate N:M list. For example,
for 24Hz 3D, select 2:2, 4:2, or 6:2 for single, double, and triple flash.
c. Select Left (L1R1 L2R2) in the L/R Display Sequence list.
d. Select True in the 3D Sync Polarity list.
e. Enter 430 in the Dark Time field or enter a value appropriate for your 3D hardware.
f. Enter -120 in the Output Delay field or enter a value appropriate for your 3D hardware.
g. Enter 0 in the Phase Delay field or enter a value appropriate for your 3D hardware.

Editing the 3D scope 2048 x 858 channel

1. Tap Menu > Channel Setup.
2. Select 3D Scope 2048x858 in the Channel Name list.
3. Tap Config 1 in the left pane and edit these settings:
a. Select 292-Dual in the Input list.
b. Select YCrCb 4:2:2 10 bits x2 in the Data Format list.
c. Select 2048x858 2.39 Scope in the Source File list.
d. Select Scope in the Screen File list.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
on page 79.
Viewing 3D Content
Defining
80