Editing A Channel Setup - Christie Roadie HD+35K User Manual

3.7.7 Editing a Channel Setup

The basic setups that describe how and where a channel can be accessed are listed in the
menu. These channel setups can be edited at any time in the
1. From the presentation level, press M
2. Press "3", or move the highlight to the
appears.
3. To edit parameters for an available channel in the
parameters you wish to change, and press E
below in Figure
4. If desired, review and/or edit the selected channel's setup options in the
Channel Option
Name
An alpha-numeric label assigned to the current channel which
can be defined and/or changed as desired. Channel names can
be upto 12 characters in length.
Number
A 2-digit channel number.
Input
Enter a numeric value (1 to 8) corresponding to the projector's
source input connection's location.
In Menu
If checked (default, except for automatically defined channels
with unchanged parameters), this defined channel then
appears in the
channel must be accessed via the
via the Auto Source function.
Auto Source
If checked, (default), the projector can automatically locate
this channel when an incoming input signal matches. If not
checked, the projector can locate the selected channel only
when it is directly selected via the
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
ENU
Channel Setup
3-24.
Figure 3-24 Channel Edit Menu (SAMPLE)
Description
Channel Setup
menu. If unchecked, the
C
Channel Edit
to display the main menu.
option, and press E
Channel Setup
NTER Channel Edit
. The
HAN
key on the remote or
C
HAN
key on the remote.
Section 3: Operation
Channel Setup
secondary menu.
NTER Channel Setup
. The
menu, select the channel whose
menu appears as shown in the sample
Channel Edit
menu:
Notes
1) If you enter a channel number that
already exists, a dialog message
appears indicating that this number is
already in use. Assign a different
channel number. 2) You can define up
to 99 channels
On-screen display (OSD) of the
channel list is an option that must be set
in the Menu Preferences menu.
A change in input signal does not result
in a channel change.
menu
3-41