Editing An Existing Channel; Copying Existing Channel Settings To A New Channel - Christie CP2308 User Manual

Field Name
ILS File
2D Lamp File
3D Lamp File
2D MCGD File
3D MCGD Left Eye File
3D MCGD Right Eye File
TCGD File
Screen File
Gamma File
Clut File
3D File
Source File
Christie Pureformity
™
Color Correction File
4. Tap Save.

Editing an existing channel

Edit an existing channel when the parameters of the input device change.
1. In the left navigation menu, tap Channel Setup.
2. In the left pane, tap a channel.
3. Edit the channel settings.
4. Tap Save.
Copying existing channel settings to a new
channel
Copy a channel to create a new channel with similar settings.
1. In the left navigation menu, tap Channel Setup.
2. In the left pane, tap a channel.
3. Tap Save As.
4. Type a name for the new channel and tap Save.
CP2308 User Guide
020-102535-03 Rev. 1 (08-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
The ILS file associated with the channel.
The 2D lamp file associated with the channel. Any changes made to the lamp
file settings are applied to all channels that use this lamp file.
The 3D lamp file associated with the channel. Any changes made to the lamp
file settings are applied to all channels that use this lamp file.
The Measured Color Gamut Data file associated with the 2D image.
The Measured Color Gamut Data file associated with the left 3D image.
The Measured Color Gamut Data file associated with the right 3D image.
The Target Color Gamut Data file associated with the channel.
The screen type, masking, cropping, and lens settings for the channel.
The gamma correction required for the proper tonal range of the source
material.
Applies a 3D color cube for increased color accuracy.
The 3D settings file associated with the channel.
The resolution and aspect ratio for the channel.
The color correction file associated with the channel. The default value is
Bypass.
Working with channels
43