NEC Univerge SV8100 Features And Specifications Manual page 2071

UNIVERGE SV8100
R-Key for Transfer and Special Services

When off-hook, press R to Recall, transfer.
Display Enhancements with Version 4000 (4.01 or higher) Software
With Version 4000 (4.01 or higher) software, the SIP DECT handset can now receive the calling party
name on an incoming internal/external call. The priority for the display is as follows:
If calling from a standard SIP terminal
1. Program 15-05-04 nick name.
2. Program 15-01-01 extension name.
3. Calling name from originating standard SIP caller.
4. Extension number.
If calling from an SLT, DT300 (including virtual extensions) or a DT700
1. Program 15-01-01 Extension name.
2. Extension number.
If calling from a trunk, (i.e. SIP trunk, ISDN, Analog C.O.)
1. Calling party name of incoming trunk. (Caller ID information).
2. Program13-04-02 abbreviated dial Name (with matching caller ID).
3. Calling party number.
For trunks, new Program 15-05-40 controls what is displayed and has the following options
1. Both Name and Number.
2. Name only.
3. Number only.
4. None.
If calling from Voice Mail
1. Program 45-01-02 Voice Mail master Name.
2. Program 45-01-09 Centralized Voice Mail Master name.
3. Program 15-01-01 Calling station information (Voicemail extension).
Wireless DECT (SIP)
Issue 12.0
2 - 2041