NEC Univerge SV8100 Features And Specifications Manual page 2088

Issue 12.0
Caller ID Display After a Call Transfer:
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-11-06 Class of Service Options (Hold/
Transfer Service) – Unscreened
Transfer (Ring Inward Transfer)
24-02-15 System Options for Transfer –
SIP Out of Range Timer
24-09-01 Call Forward Split Settings – Call
Forwarding Type
24-09-02 Call Forward Split Settings – CO
Call Forwarding Destination for
Both Ring, All Call, No Answer
24-09-03 Call Forward Split Settings –
Interim Call Forwarding
Destination for Both Ring, All
Call, No Answer
2 - 2058
Description/Comments
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to use Unscreened Transfer.
When not receiving any response
within this timer setting, system
determines SIP terminal is out of
range. When set to 0, timer is
invalid.
Type of Call Forwarding
Assign CO Call Forwarding
Destination for ring, all call and no
answer.
Assign Intercom Call Forwarding
Destination for ring, all call and no
answer.
UNIVERGE SV8100
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 ~ 30 (sec)
(default = 4)

0 = Call Forwarding Off
1 = Call Forwarding
with both ring
2 = Call Forwarding
when no answer
3 = Call Forwarding all

calls
4 = Call Forwarding
busy or no answer
5 = Call Forwarding
when busy
(default = 0)
0~9, , , P, R, @
#
(Up to 24 digits)
P = Pause
R = Hookflash
@ = Wildcard
(default not assigned)
0~9, , , P, R, @
#
(Up to 24 digits)
P = Pause
R = Hookflash
@ = Wildcard
(default not assigned)
Wireless DECT (SIP)
Level
2 3



