Table of Contents
Advertisement
BIOS Beep Codes
BIOS Beep Codes Table
PEI Beep Codes
# of Beeps
1
2
4
4
5
6
BIOS Recovery Instruction
AMI has an embedded recovery technique. In the event that the BIOS becomes corrupt the boot block can be used to
restore the BIOS to a working state. To restore your BIOS, please follow the instructions listed below:
Recovery Instruction:
1. Change xxx.ROM to amiboot.rom.
2. Copy amiboot.rom and AFUDOS.exe to USB diskette.
3. Setting BIOS Recovery jump to enabled status.
4. Boot into BIOS recovery.
5. Run Proceed with flash update
Description
Invalid password
Recovery started
Recovery failed
S3 Resume failed
No Console Input/Output Devices are found
Flash update is failed
71
Advertisement
Table of Contents
