Common Dim Commands - NEC UNIVERGE SV9100 System Maintenance Manual

Issue 1.0
C
S 6
OMMON
ECTION
Mail in 0000
Mail in 0000
Mail in 0012
Mail in 0012



3 - 8
DIM C
OMMANDS
Enter Function
Output of all system activity is
turned on.
No ISDN information output.
Output of all system activity
is turned off.
Enter Function
Output of all ISDN activity on
the system is turned on.
Output of all ISDN activity on
the system is turned off.
When the ISDN output is turned on, the DIM will output the ISDN blade slot and
circuit that is currently set as the master clock for the system.
The slot number is shown by master current bid : xxH (xx is the slot number in
hexadecimal).
The circuit of the blade is shown by master current line : xxH (xx is the circuit number
in hexadecimal).
UNIVERGE SV9100
DIM Output
Enter CAPS debug mode.
The activity of all extensions and lines is
output.
Exit CAPS debug mode.
DIM Output
Enter ISDN debug mode.
master current bid : xxH
master current line : xxH
The activity of all ISDN blades will be output.
Exit ISDN debug mode.