Configuration > Ddm > Ddm Temperature Settings; Configuration > Ddm > Ddm Voltage Settings Threshold Settings - D-Link DGS-2000 Series Reference Manual

4 Web-based Switch Configuration
Configuration > DDM > DDM Temperature Settings
The DDM Temperature Threshold Settings page allows user to configure the DDM temperature threshold for
specific ports on the Switch.
Port: Specifies the port to be configured.
Type: Specifies the type for the operating parameter, the options are High Alarm, Low Alarm, High Warning
and Low Warning.
High Alarm: Specifies the high threshold for the alarm. When the operating temperature rises above
the configured value, the action associated with the alarm is taken.
Low Alarm: Specifies the low threshold for the alarm. When the operating temperature falls below
the configured value, the action associated with the alarm is taken.
High Warning: Specifies the high threshold for the warning. When the operating temperature rises
above the configured value, the action associated with the warning is taken.
Low Warning: Specifies the low threshold for the warning. When the operating temperature falls
below the configured value, the action associated with the warning is taken.
Vaule (-128 – 127.996): Specifies the value for the specified type of port.
Click Apply to make the configurations take effect.
Configuration > DDM > DDM Voltage Settings Threshold Settings
The DDM Voltage Settings Threshold Settings page is used to configure the DDM voltage threshold for
specific ports on the Switch.
Figure 4.94 - Configuration > DDM > DDM Voltage Settings Threshold Settings
Port: Specifies the port to be configured.
Type: Specifies the type for the operating parameter, the options are High Alarm, Low Alarm, High Warning
and Low Warning.
High Alarm: Specifies the high threshold for the alarm. When the operating Voltage rises above the
configured value, the action associated with the alarm is taken.
Low Alarm: Specifies the low threshold for the alarm. When the operating Voltage falls below the
configured value, the action associated with the alarm is taken.
High Warning: Specifies the high threshold for the warning. When the operating Voltage rises
above the configured value, the action associated with the warning is taken.
Figure 4.93 - Configuration > DDM > DDM Temperature Settings
D-Link DGS-2000 Series Ethernet Switch User Manual
7 7 3 3