Table of Contents
Advertisement
4 Configuration
Power Unit: Specifies the power unit for DDM. The options are mW (milliwatts) and dBm (decibel-milliwatts).
From Port / To Port: Specifies a port or range of ports to be configured.
State: Specifies to enable or disable the DDM settings state.
Shutdown: Specifies whether or not to shutdown the port, when the operating parameter exceeds the Alarm
or Warning threshold.
Click the Apply button to accept the changes made.
Configuration > DDM > DDM Temperature Threshold Settings
The DDM Temperature Threshold Settings page allows user to configure the DDM temperature threshold for
specific ports on the Switch.
Port: Specifies the port to be configured.
Type: Specifies the type for the operating parameter, the options are High Alarm, Low Alarm, High Warning
and Low Warning.
High Alarm: Specifies the high threshold for the alarm. When the operating temperature rises above
the configured value, the action associated with the alarm is taken.
Low Alarm: Specifies the low threshold for the alarm. When the operating temperature falls below
the configured value, the action associated with the alarm is taken.
High Warning: Specifies the high threshold for the warning. When the operating temperature rises
above the configured value, the action associated with the warning is taken.
Low Warning: Specifies the low threshold for the warning. When the operating temperature falls
below the configured value, the action associated with the warning is taken.
Vaule (-128 – 127.996): Specifies the value for the specified type of port.
Click the Apply button to accept the changes made.
Configuration > DDM > DDM Voltage Settings Threshold Settings
The DDM Voltage Settings Threshold Settings page is used to configure the DDM voltage threshold for
specific ports on the Switch.
Figure 4.103 - Configuration > DDM > DDM Voltage Settings Threshold Settings
Port: Specifies the port to be configured.
Type: Specifies the type for the operating parameter, the options are High Alarm, Low Alarm, High Warning
and Low Warning.
DES-1210/ME Series Metro Ethernet Managed Switch User Manual
Figure 4.102 - Configuration > DDM > DDM Temperature Threshold Settings
66
Advertisement
Table of Contents
