Ddm Temperature Threshold Settings - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Trap State
Log State
Power Unit
Unit
From Port / To Port
State
Shutdown
Click the Apply button to accept the changes made for each individual section.

DDM Temperature Threshold Settings

This window is used to configure the DDM Temperature Threshold Settings for specific ports on the Switch.
Figure 2-3 DDM Settings window
Description
Specify whether to send the trap, when the operating parameter exceeds the alarm or
warning threshold.
Specify whether to send the log, when the operating parameter exceeds the alarm or
warning threshold.
Specify the unit of the DDM TX and RX power.
Select the unit to configure.
Select a range of ports to be configured.
Use the drop-down menu to enable or disable the DDM state.
Specify whether to shutdown the port, when the operating parameter exceeds the Alarm or
Warning threshold.
Alarm - Shutdown the port when the configured alarm threshold range is exceeded.
Warning - Shutdown the port when the configured warning threshold range is exceeded.
None - The port will never shutdown regardless if the threshold ranges are exceeded or
not. This is the default.
9