DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
LLDP Dot1 TLVs Settings
The LLDP Dot1 TLVs Settings page is used to enable or disable outbound LLDP advertisements for IEEE 802.1
organizationally unique port VLAN ID TLVs.
To view the following window, click L2 Features > LLDP > LLDP Dot1 TLVs Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Port VLAN
Protocol VLAN
VLAN Name
Protocol Identity
Click the Apply button to accept the changes made.
LLDP Dot3 TLVs Settings
The LLDP Dot3 TLVs Settings page is used to enable or disable outbound LLDP advertisements for IEEE 802.3
organizationally unique TLVs.
To view the following window, click L2 Features > LLDP > LLDP Dot3 TLVs Settings, as shown below:
Figure 5-778 LLDP Dot1 TLVs Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select this option to enable or disable sending the port VLAN ID TLV. The Port
VLAN ID TLV is an optional fixed length TLV that allows a VLAN bridge port to
advertise the port VLAN ID (PVID) that will be associated with untagged or
priority tagged frames.
Select this option to enable or disable sending the Port and Protocol VLAN ID
(PPVID) TLV. Enter the VLAN ID in PPVID TLV.
Select this option to enable or disable sending the VLAN name TLV. Enter the
ID of the VLAN in the VLAN name TLV.
Select this option to enable or disable sending the Protocol Identity TLV and
the protocol name. Options for protocol name to choose from are None,
EAPOL, LACP, GVRP, STP, and All.
177