Lldp Dot1 Tlvs Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Switch always included mandatory data in its outbound advertisements. There are four optional data
types that can be configured for an individual port or group of ports to exclude one or more of these data
types from outbound LLDP advertisements. The mandatory data type includes four basic types of
information (end of LLDPDU TLV, chassis ID TLV, port ID TLV, and Time to Live TLV). The mandatory
data types cannot be disabled. There are also four data types which can be optionally selected. These
include Port Description, System Name, System Description and System Capability.
To view the following window, click L2 Features > LLDP > LLDP Basic TLVs Settings, as shown below:
The fields that can be configured in LLDP Basic TLVs Settings are described below:
Parameter
Unit
From Port ~ To Port
Port Description
System Name
System Description
System Capabilities
Click the Apply button to accept the changes made.

LLDP Dot1 TLVs Settings

LLDP Dot1 TLVs are organizationally specific TLVs which are defined in IEEE 802.1 and used to
configure an individual port or group of ports to exclude one or more of the IEEE 802.1 organizational port
VLAN ID TLV data types from outbound LLDP advertisements.
To view the following window, click L2 Features > LLDP > LLDP Dot1 TLVs Settings, as shown below:
Figure 5-75 LLDP Basic TLVs Settings Window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select this option to enable or disable the Port Description option.
Select this option to enable or disable the System Name option.
Select this option to enable or disable the System Description option.
Select this option to enable or disable the System Capabilities option.
161