Switching Off The Device; Activating Power-Saving Mode; Open Bios Setup; Pxe System Boot - Fujitsu S540 Operating Manual

Operation

Switching off the device

► Shut down the operating system in the proper way. In Windows: from the
Start menu select the Shut Down option.
Device, Monitor,
► If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
If the device is switched off, it consumes a minimum of energy.
The ON/OFF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage, remove the power plug from the power socket.
► If necessary, switch the monitor off (see the operating manual for the monitor).

Activating power-saving mode

Due to customer requirements and requirements of the operating system, the
"Wake-on-LAN" (WoL) function is switched on by default. With the WoL function,
the power draw in OFF mode increases slightly.
To meet the requirements of EC regulation 1275/2008 regarding the implementation of the
Ecodesign directive (2009/125/EC), the default WoL setting must be changed as follows:
► To start the BIOS Setup utility after the system start, press the ON/OFF
switch for two to three seconds.
or
► Press the
► In the Power sub-menu, change the External Power Button Control, LAN and Keyboard to disabled.
► To save the setting and exit the BIOS Setup Utility, press function key
After making this change, the system will achieve the lowest energy
saving mode during shut-down.
In this status, the "Wake-on-LAN" function can no longer be used.

Open BIOS Setup

BIOS-Setup
► When the system starts, press the ON/OFF switch for two to three seconds.
or
► Press (possibly several times) the
BIOS Setup will be started. Select one of the tabs to access other setting options in BIOS Setup.

PXE system boot

PXEsystem boot
► Switch the device on with the ON/OFF switch.
► When starting the system, press the
The boot menu is displayed.
► Select the desired boot option.
26
function key.
F2
F2 key.
F12 key several times.
F4 .
Fujitsu