System] Menu For Primequest 2400E/2800E; System Status] Window; Figure 1.1 [System Status] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.2

[System] Menu for PRIMEQUEST 2400E/2800E

In [System] menu, it is possible to display and set the status of all the hardware components in the
PRIMEQUEST 2400E and PRIMEQUEST 2800E system.
A display and a set item of [System] menu are different in PRIMEQUEST 2800B.
Refer to Chapter 1.7 for details.
Remarks
If "Read Error" is displayed for [Part Number] and [Serial Number] on MMB Web-UI (contents area and
information area), confirm the problem by referring to "11.2 Troubleshooting" of
Administration Manual
or repairs assistance service.
Confirm the model name and serial number shown on the label affixed on the main unit and report it.

1.2.1 [System Status] window

[System Status] window shows the status of entire PRIMEQUEST 2000 series system. The contents
displayed may differ depending on the configuration of the unit.
You can also display details of each unit by clicking the link displayed in the frame.
.
The contents which are displayed as the status of unit are as follows.
[OK]
[Not-present]
[Warning]
[Failed]
(C122-E175EN). If the error could not be resolved, contact your sales representative

FIGURE 1.1 [System Status] window

: It is shown for the unit which operates normally without any trouble.
: It is shown for the unit which is not mounted. It is shown in gray colored background.
: Though it is not serious, it shows the unit where a problem may occur. It is shown by
icon.
: It shows the unit, where failure has occurred, and it must be disconnected. It is shown by
icon.
PRIMEQUEST 2000 Series