Chapter 1 Mmb Web-Ui (Web User Interface) Operations; Web-Ui Menus; Table 1.1 User Privileges - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations

1.1 Web-UI Menus

CHAPTER 1 MMB Web-UI (Web User
This chapter describes the menus used to manage and operate the PRIMEQUEST 2000 series server with
the MMB Web-UI. It also describes how to use the MMB Web-UI.
1.1 Web-UI Menus
The available MMB Web-UI menus differ depending on the user privileges. TABLE 1.1 User privileges lists
the user privileges needed to check and operate the MMB Web-UI menus.
Privilege level
Administrator
Operator
Partition Operator
User
CE
The following sections outline the Web-UI menus that are available for each type of user privilege.
- 1.1.1 Web-UI menus (Administrator)
1.1.2 Web-UI menus (Operator)
-
1.1.3 Web-UI menus (Partition Operator)
-
1.1.4 Web-UI menus (User)
-
- 1.1.5 Web-UI menus (CE)
- 1.1.6 Web-UI menus in maintenance mode
1.1.7 Web-UI menus in maintenance mode (Administrator)
-
1.1.8 Web-UI menus in maintenance mode (Operator)
-
1.1.9 Web-UI menus in maintenance mode (Partition Operator)
-
- 1.1.10 Web-UI menus in maintenance mode (User)
- 1.1.11 Web-UI menus in maintenance mode (CE)
1.1.12 Web-UI menus in maintenance mode (maintenance personnel)
-
1.1.13 Web-UI menus (PRIMEQUEST 2800B2/2800B
-
Interface) Operations

TABLE 1.1 User privileges

Administrator accounts are permitted to perform all operations and checks.
Operator accounts are permitted to check the PRIMEQUEST 2000 series server status
and configure the system.
They are not permitted to manage users or change the network configuration.
With Operator privileges, you cannot:
- Manipulate the power supply from the [System Power Control] window
- Change the status of the FANs and PSUs
- Change the partition configuration
- Configure a Reserved SB
Partition Operator accounts have the same privileges as Operator accounts, except that
their privileges are restricted to specific partitions. Like Operator accounts, they are
permitted to check the system status.
Unlike Operator accounts, they are not permitted to perform some operations such as
clearing the status of an SB/IOU.
User accounts are only permitted to check the PRIMEQUEST 2000 series server status.
They are not permitted to set system configuration information or power on or off the
partitions.
CE accounts are permitted to check the PRIMEQUEST 2000 series server status.
They are also permitted to manipulate the power supply.
Description
model)
37
CA92344-0539-04