Figure K.4 Driver List; Figure K.5 Drivers Command Of Uefi Shell - Fujitsu PRIMEQUEST 2000 Series Administration Manual

Appendix K How to Confirm Firmware of SAS RAID Controller Card
K.1
For details on UEFI operation, see "PRIMEQUEST 2000 series User Interface Operating Instructions"
(C122-E176EN) and "PRIMEQUEST 2000 series Tool Reference" (C122-E177EN).
Note
If driver list does not fall within window, input 'drivers -b'. Driver list is shown by a page.
6. Check the number of UEFI driver and the number of LSI EFI SAS Driver.
In below example, the number of UEFI driver is '126'.
7. Execute dh command and check the controller number of 'LSI MegaRaid SAS Control'
Shell> dh -d 126
In below example, the controller number is '125'.
How to confirm firmware version of SAS RAID controller card

FIGURE K.4 Driver list

FIGURE K.5 drivers command of UEFI Shell

287
C122-E175-02EN