Set Time Out Value - Fujitsu PRIMERGY RX600 S3 User Manual

Chapter 8 Configuring Hardware and Utilities
Changing the Order of the Boot Devices
1
Select [Change Boot Order] and press the [Enter] key.
The Change Boot Order screen appears. The devices are listed in the boot order from the top.
2
Select [Change <1st/2nd/3rd/4th> Boot option order] and press the [Enter] key.
Then select the boot device and press the [Enter] key.
3
When the whole boot order is complete, select [Apply Changes] and press the
[Enter] key.
4
Select [Go Back To Main Page] and press the [Enter] key.
The boot order is modified and the screen returns to the Boot Maintenance Manager menu.
Setting the Boot Device for Each Device Type
Selects the boot device when multiple devices of the same type are connected.
1
Select the device type to modify, and press the [Enter] key.
The [Select <device name> Order] screen appears.
2
Select the boot device to give the priority, and press the [Enter] key.
3
Select [Apply Changes] and press the [Enter] key.
4
Select [Go Back To Main Page] and press the [Enter] key.
The boot device is chosen and the screen returns to the Boot Maintenance Manager menu.

Set Time Out Value

Sets the timeout period for automatic startup.
1
Select [Set Time Out Value] and press the [Enter] key.
The [Set Time Out Value] screen appears.
2
In the input area of the [Auto Boot Time-Out] item, enter the timeout period for
automatic startup in seconds.
Initially, the value is set to [10].
3
Press the [Enter] key.
4
Select [Apply Changes] and press the [Enter] key.
5
Select [Go Back To Main Page] and press the [Enter] key.
The screen returns to the Boot Maintenance Manager menu.
242