Set Time Out Value - Fujitsu Primergy RX600 S2 User Manual

Chapter 8 Configuring Hardware and Utilities
3
When the whole boot order is complete, select [Apply Changes] and press the
[Enter] key.
4
Select [Go To Back Main Page] and press the [Enter] key.
The boot order is modified and the screen returns to the Boot Maintenance Manager menu.
●
Setting the Boot Device for Each Device Type
Selects the boot device when multiple devices of the same type are connected.
1
Select the device type to modify, and press the [Enter] key.
The [Select <device name> Order] screen appears.
2
Select the boot device to give the priority, and press the [Enter] key.
3
Select [Apply Changes] and press the [Enter] key.
4
Select [Go To Back Main Page] and press the [Enter] key.
The boot device is chosen and the screen returns to the Boot Maintenance Manager menu.

■ Set Time Out Value

Sets the timeout period for automatic startup.
1
Select [Set Time Out Value] and press the [Enter] key.
The [Set Time Out Value] screen appears.
2
In the input area of the [Auto Boot Time Out] item, enter the timeout period for
automatic startup in seconds.
Initially, the value is set to [10].
3
Press the [Enter] key.
4
Select [Apply Changes] and press the [Enter] key.
5
Select [Go To Back Main Page] and press the [Enter] key.
The screen returns to the Boot Maintenance Manager menu.
236