Figure 3.38 Display Example Of Boot Option Name Change Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

UEFI Menu Operations
3.5 [Boot maintenance Manager] Menu
5. Press [Enter] key. Window showing
Window" is displayed.

FIGURE 3.38 Display Example of Boot Option Name Change Window

Set Boot option name and set options when booting.
a. Boot option name setting
Place the cursor on [Input the description], press [Enter] key. Enter name as Pop-up window for
input is displayed.
b. Setting options when booting
Place the cursor on [Input Optional Data], press [Enter] key. Enter name as Pop-up window for input
is displayed.
For details on the number of characters and types of character that can be entered, see "Number
of Characters and Types of Characters that can be entered"
6. Exit from this menu by following operations.
 To exit from this menu after saving the changed setting, select [Commit Changes and Exit] and press
[Enter] key.
・To exit from this menu without saving the changed setting, select [Discard Changes and Exit] is and press
[Enter] key.
7. Confirm that the boot option is added normally, by using the following procedure of
Display Example of [Boot Manager]
a. Open the [Boot Manager] menu from Boot Manager front page.
Menu shown in " " is displayed.
b. It is confirmed that the added boot option is displayed at the footer.
"FIGURE 3.38 Display Example of Boot Option Name Change
Menu.
620
FIGURE 3.39
CA92344-0539-04