Table of Contents
Advertisement
Operation
Switching off the device
► Shut down the operating system in the proper way. In Windows: from the
Start menu select the Shut Down option.
Device,
Monitor,
► If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
If the device is switched off, it consumes a minimum of energy.
The ON/OFF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage, remove the power plug from the power socket.
► If necessary, switch the monitor off (see the operating manual for the monitor).
Activating power saving mode (FUJITSU Thin
Client FUTRO only)
Due to customer requirements and requirements of the operating system, the
"Wake-on-LAN" (WoL) function is switched on by default. With the WoL function,
the power draw in OFF mode increases slightly.
To meet the requirements of EC regulation 1275/2008 regarding the implementation of the
Ecodesign directive (2009/125/EC), the default WoL setting must be changed as follows:
► To start the BIOS Setup Utility after system boot, press function key
► In the Power sub-menu, select the Low Power Soft Off setting and switch it to enabled.
► To save the setting and exit the BIOS Setup Utility, press function key
After making this change, the system will achieve the lowest energy
saving mode during shut-down.
In this status, the "Wake-on-LAN" function can no longer be used.
Open BIOS Setup
BIOS-Setup
► When the system starts, press the
BIOS Setup will be started. Select one of the tabs to access other setting options in BIOS Setup.
PXE system boot
PXEsystem boot
► Switch the device on with the ON/OFF switch.
► When starting the system, press the
The boot menu is displayed.
► Select the desired boot option.
28
F2
key (several times if necessary).
F12
key several times.
F2
or the
Del
key.
F4
.
Fujitsu
Hide quick links:
Advertisement
Table of Contents
