Procedure For Setting Uefi Driver Version 4.12A7 Or Later On The Fc Card; Displaying The Device Manager - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

2.3 Procedure for Setting UEFI Driver Version 4.12a7 or Later
on the FC Card
This section describes the procedure for setting UEFI driver version 4.12a7 or later.

2.3.1 Displaying the Device Manager

1. From the UEFI Shell, enter the following command to display the Boot Manager Front Page.
> exit
2. Select [Device Manager], and then press the [Enter] key.
FIGURE 2.42
3. The [Device Manager] screen appears.
Boot Manager front page (screen display example)
48