Equipment Removal
Remove Filler Panel
9.1
Remove Filler Panel
The following links lead to related information:
Install Filler Panel
Warning: All unused PIU slots in the blade require a filler panel; otherwise, improper airflow may occur
and result in equipment damage.
Step 1
Locate the filler panel to be removed.
Step 2
Press the release latch, and slowly and carefully remove the filler panel using the handle located at the front of
the panel.
Release Lever
Figure 167
Removing Filler Panel
✓
This task is complete.
·
Release 19.1.1
Issue 1.1, May 2021
424
Fujitsu and Fujitsu Customer Use Only