PRIMEQUEST 1000 Series Installation Manual
CHAPTER 7 Work after Installation
1. Click [Network Configuration] - [SNMP Configuration] - [SNMP v3 Configuration].
The [SNMP v3 Configuration] window appears. For details on the [SNMP v3 Configuration] window, see
[SNMP v3 Configuration] window in 1.5.6 [SNMP Configuration] menu in the PRIMEQUEST 1000 Series
Tool Reference (C122-E110EN).
FIGURE 7.9 [SNMP v3 Configuration] window (example)
2. Enter values for SNMP v3 users.
You can register up to 16 users.
3. Click the [Apply] button.
This restarts the SNMP Service to apply the values for the selected users.
7.5.3
Configuring SSH
Configure SSH for the MMB. You can set it with Administrator privileges.
Operations
1. Click [Network Configuration] - [Network Protocols].
The [Network Protocols] window appears. For details on the [Network Protocols] window, see 1.5.4
[Network Protocols] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
219
C122-E107-09EN