Figure 6.9 Example Of [Snmp V3 Configuration] - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 6 Work after installation
6.5 Set up of security
Set up SNMP v3
Specific engine ID and specific user is set in SNMP v3.
Remark
When an engine ID or IP address is changed, all the users set for SNMP v3 access should be set again. To enable the set
users, it is necessary to reboot SNMP service once it is stopped. When [Apply] button is clicked for that, SNMP service
gets temporarily stopped.
Operations
1. Click [Network Configuration] - [SNMP Configuration] - [SNMP v3 Configuration].
→ [SNMP v3 Configuration] window is displayed. See "["■ [SNMP v3 Configuration] window" of 1.5.6 [SNMP
Configuration] Menu" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539) for the details of [SNMP v3
Configuration] window.
2. Enter SNMP v3 user.
A maximum of 16 users can be registered.
3. Click [Apply] button.
SNMP service is restarted for reflecting the selected user.
Example of [SNMP v3 Configuration]
FIGURE 6.9
113
CA92344-0536-04