Console Redirection - Fujitsu D3320 PRIMERGY BX2560 M2 Reference Manual

Server Mgmt menu
7.2

Console Redirection

The following parameters can be set in this menu. Some of them are only
available under special preconditions.
Console Redirection
Specifies the interface used for communication with the terminal.
Disabled
The terminal interface is disabled.
Serial 1
The terminal uses the first serial interface.
Baud Rate
Specifies the transfer rate for communication with the terminal.
This setting must be identical on both terminal and server.
Allowed values are:
9600, 19.2 k, 38.4 k, 57.6 k, 115.2 k
The data is transferred to the terminal at the rate set.
Protocol
Shows the assigned console type.
This setting must be identical on both the terminal and the server.
Allowed values are:
VT100, PC ANSI, VT100+, VT-UTF8
The assigned console is used to transfer the data to the terminal.
Flow Control
This setting determines how the transfer via the interface is controlled.
This setting must be identical on both terminal and server.
None
The interface is operated without transfer control.
CTS/RTS
The transfer control is performed by the hardware. This mode
must also be supported by the cable.
64 D3320 - BIOS Setup Utility
BX2560 M2