Power Control/Scheduled Operation - Fujitsu PRIMEQUEST 480 System Design Manual

4.2.9

Power control/scheduled operation

This function sets a schedule for turning on and off the power supply of the partitions
and automatically controls the operation of the partitions in accordance with the set
schedule.
Figure 4.20 Example of the scheduled operation display screen
4.2.10 Firmware maintenance
This function updates various types of firmware. The update is performed by Fujitsu
certified service engineer.
The following firmware components are subject to update:
- MMB firmware (installed in the MMB)
- GSWB firmware (installed in the GSWB)
- BMC firmware (installed in each partition)
- PAL/SAL/EFI firmware (installed in each partition)
C122-B001-02EN
Figure 4.20 shows an example of the display for scheduled operation.
Partition
Period Power on and off time
4.2 MMB Functions
4-25