Table of Contents
Advertisement
4 Configuration
The information that can be viewed is described below:
Item
Test Result
Cable Fault Distance
(meters)
Monitoring > Statistics > Port Counters
This window displays the status of each port's packet count.
Click Refresh to renew the port counters statistics table.
Click Clean All to delete all port counter statistics.
Monitoring > Mirroring Settings
Port Mirroring is a method of monitoring network traffic that forwards a copy of each incoming and/or
outgoing packet from one port of the Switch to another port, where the packet can be studied. This enables
network managers to better monitor network performances.
Figure 4.55 - Cable Diagnostics - Results
Description
The description of the cable diagnostic results.
•
OK means the cable is in good condition.
•
Short in Cable means there is an unintended
connection between two or more conductors in the
Ethernet cable.
•
Open in Cable means the wires of RJ45 cable may be
broken or the other end of the cable is simply
disconnected.
•
Test Failed means and error occurred during the
cable test. Please select the same port and test again.
Indicates the distance of the cable fault from the Switch port. If
the cable is less than 2 meters, it will show "No Cable",
whether the cable is connected to the port or not.
Table 4.34
Figure 4.56 - Monitoring > Statistics > Port Counters
3
3
9
9
D-Link Smart Managed Switch User Manual
Advertisement
Table of Contents
