Table of Contents
Advertisement
4 Web-based Switch Configuration
Target IP address allows both IPv4 and IPv6 addresses format.
The time of ping can be configured in Repeat Pinging filed; Infinite and range of 1-255 are available options
to use.
Timeout filed specifies the timeout value of every single ping packet. The timeout range from 1- 99 seconds.
Click Start to initiate the Ping Program
System > Trace Route
Perform trace route command direct on system interface. This command used to probe path to the specific
destination address.
IP address: Specify the destination IP address
TTL: Specify the maximum Time-to-Live
Timeout: Specify the maximum time for response in a hop.
Probe: Specify the time to probe the destination.
System > MAC Notification Settings
MAC Notification page is used to monitor MAC addresses learned and entered into the forwarding database.
To globally set MAC notification on the Switch, user should enabled or disabled state, input the Time Interval
between notification and History Size then click the Apply button.
State: Enabled or Disabled MAC notification globally on the Switch.
Figure 4.40 – System > Ping Test
Figure 4.41 – System > Trace Route
Figure 4.42 – System > MAC Notification Settings
4
4
1
1
D-Link DGS-2000 Series Ethernet Switch User Manual
Advertisement
Table of Contents
