Snmp Community Table Settings - D-Link Dis-200G Series Web Ui Reference Manual

SNMP Community Table Settings

This window is used to create an SNMP community string to define the relationship between the SNMP
manager and an agent. The community string acts like a password to permit access to the agent on the
Switch. The characteristics can be associated with the community string:
Read/write or read-only level permission for the MIB objects accessible to the SNMP community.

To view the following window, click Management > SNMP > SNMP Community Table Settings, as
shown below:
The fields that can be configured are described below:
Parameter
Community Name
View Name
Access Right
Click the Add button to add a new entry based on the information entered.
Click the Clear button to remove the specified entry.
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Figure 5-5 SNMP Community Table Settings window
Description
Enter an alphanumeric string of up to 32 characters that is used to
identify members of an SNMP community. This string is used like a
password to give remote SNMP managers access to MIB objects
in the Switch's SNMP agent.
Enter an alphanumeric string of up to 32 characters that is used to
identify the group of MIB objects that a remote SNMP manager is
allowed to access on the Switch. The view name must exist in the
SNMP View Table.
Select the access right here. Options to choose from are Read
Only, and Read Write.
Read Only - SNMP community members using the community
string created can only read the contents of the MIBs on the
Switch.
Read Write - SNMP community members using the community
string created can read from, and write to the contents of the MIBs
on the Switch.
37