Snmp-Server - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual
Command
show snmp notify-filter
ATC Trap Commands
snmp-server enable port-traps
atc broadcast-alarm-clear
snmp-server enable port-traps
atc broadcast-alarm-fire
snmp-server enable port-traps
atc broadcast-control-apply
snmp-server enable port-traps
atc broadcast-control-release
snmp-server enable port-traps
atc multicast-alarm-clear
snmp-server enable port-traps
atc multicast-alarm-fire
snmp-server enable port-traps
atc broadcast-control-apply
snmp-server enable port-traps
atc multicast-control-release

snmp-server

This command enables the SNMPv3 engine and services for all management clients
(i.e., versions 1, 2c, 3). Use the no form to disable the server.
Syntax
[no] snmp-server
Default Setting
Enabled
Command Mode
Global Configuration
Example
SSE-G2252(config)#snmp-server
SSE-G2252(config)#
Table 22-1. SNMP Commands (Continued)
Function
Displays the configured notification logs
Sends a trap when broadcast traffic falls beneath the
lower threshold after a storm control response has been
triggered
Sends a trap when broadcast traffic exceeds the upper
threshold for automatic storm control
Sends a trap when broadcast traffic exceeds the upper
threshold for automatic storm control and the apply timer
expires
Sends a trap when broadcast traffic falls beneath the
lower threshold after a storm control response has been
triggered and the release timer expires
Sends a trap when multicast traffic falls beneath the
lower threshold after a storm control response has been
triggered
Sends a trap when multicast traffic exceeds the upper
threshold for automatic storm control
Sends a trap when multicast traffic exceeds the upper
threshold for automatic storm control and the apply timer
expires
Sends a trap when multicast traffic falls beneath the
lower threshold after a storm control response has been
triggered and the release timer expires
22-2
Mode
PE
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)