Show Lldp Info Remote-Device - Supermicro SSE-G2252 User Manual

Port ID
Port Description : Ethernet Port on unit 1, port 1
MED Capability
SSE-G2252P#

show lldp info remote-device

This command shows LLDP global and interface-specific configuration settings for
remote devices attached to an LLDP-enabled port.
Syntax
show lldp info remote-device [detail interface]
detail - Shows configuration summary.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
port-channel channel-id (Range: 1-12)
Command Mode
Privileged Exec
Example
Note that an IP phone or other end-node device which advertises LLDP-MED
capabilities must be connected to the switch for information to be displayed in the
"Device Class" field.
SSE-G2252#show lldp info remote-device
LLDP Remote Devices Information
Interface Chassis ID
--------- ----------------- ----------------- ---------------------
Eth 1/1 00-1A-7E-AC-2B-12 00-1A-7E-AC-2B-13
SSE-G2252#show lldp info remote-device detail ethernet 1/1
---------------------------------------------------------------
Local Port Name
Chassis Type
Chassis ID
Port ID Type
Port ID
: 00-1A-7E-AC-2B-13
: LLDP-MED Capabilities
Network Policy
Location Identification
Extended Power via MDI - PSE
Extended Power via MDI - PD
Inventory
Port ID
: Eth 1/1
: MAC Address
: 00-1A-7E-AC-2B-12
: MAC Address
: 00-1A-7E-AC-2B-13
39-25
Chapter 39: LLDP Commands
System Name