Show Ip Default-Gateway; Show Ip Interface - Supermicro SSE-G2252 User Manual

show ip default-gateway

This command shows the IPv4 default gateway configured for this device.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ip redirects
ip default gateway 10.1.0.254
Console#
Related Commands
"ip default-gateway" on page 42-4
"show ipv6 default-gateway" on page 42-20

show ip interface

This command displays the settings of an IPv4 interface.
Command Mode
Privileged Exec
Example
SSE-G2252#show ip interface
Vlan 1 is Administrative Up - Link Up
Address is 00-E0-0C-00-00-FD (via 00-E0-0C-00-00-FD)
Index: 1001, MTU: 1500, Bandwidth: 1g
Address Mode is DHCP
IP Address: 192.168.0.3 Mask: 255.255.255.0
SSE-G2252#
Related Commands
"ip address" on page 42-2
"show ipv6 interface" on page 42-21
Chapter 42: IP Interface Commands
42-5