Aaa Accounting Commands - Supermicro SSE-G2252 User Manual

aaa accounting commands

This command enables the accounting of Exec mode commands. Use the no form to
disable the accounting service.
Syntax
aaa accounting commands level {default | method-name} start-stop group {tacacs+
|server-group}
no aaa accounting commands level {default | method-name}
level - The privilege level for executing commands. (Range: 0-15)
default - Specifies the default accounting method for service requests.
method-name - Specifies an accounting method for service requests. (Range: 1-255
characters)
start-stop - Records accounting from starting point and stopping point.
group - Specifies the server group to use.
tacacs+ - Specifies all TACACS+ hosts configure with the
command.
server-group - Specifies the name of a server group configured with the
group server
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
• The accounting of Exec mode commands is only supported by TACACS+ servers.
• Note that the default and method-name fields are only used to describe the
accounting method(s) configured on the specified TACACS+ server, and do not
actually send any information to the server about the methods to use.
Example
SSE-G2252(config)#aaa accounting commands 15 default start-stop group
tacacs+
SSE-G2252(config)#
command. (Range: 1-255 characters)
24-17
Chapter 24: Authentication Commands
tacacs-server host
aaa