spanning-tree mst configuration
This command changes to Multiple Spanning Tree (MST) configuration mode.
Default Setting
No VLANs are mapped to any MST instance. The region name is set the switch's MAC
address.
Command Mode
Global Configuration
Example
SSE-G2252(config)#spanning-tree mst configuration
SSE-G2252(config-mstp)#
Related Commands
"mst vlan" on page 34-13
"mst priority" on page 34-12
"name" on page 34-14
"revision" on page 34-15
"max-hops" on page 34-11
Chapter 34: Spanning Tree Commands
34-9