Supermicro SSE-G2252 User Manual page 386

SSE-G2252/SSE-G2252P Switches User's Manual
• System Description – The system description is taken from the sysDescr
object in RFC 3418, which includes the full name and version identification of
the system's hardware type, software operating system, and networking
software.
• System Name – The system name is taken from the sysName object in
RFC 3418, which contains the system's administratively assigned name. To
configure the system name, see
on page
• 802.1 Organizationally Specific TLVs – Configures IEEE 802.1 information
included in the TLV field of advertised messages.
• Protocol Identity – The protocols that are accessible through this interface
(see Section 7-3: "Protocol VLANs" on page
• VLAN ID – The port's default VLAN identifier (PVID) indicates the VLAN with
which untagged or priority-tagged frames are associated (see
"IEEE 802.1Q VLANs" on page
• VLAN Name – The name of all VLANs to which this interface has been
assigned (see
"Protocol VLANs" on page
• Port and Protocol VLAN ID – The port-based protocol VLANs configured on
this interface (see
Section 7-3: "Protocol VLANs" on page
• 802.3 Organizationally Specific TLVs – Configures IEEE 802.3 information
included in the TLV field of advertised messages.
• Link Aggregation – The link aggregation capabilities, aggregation status of the
link, and the IEEE 802.3 aggregated port identifier if this interface is currently a
link aggregation member.
• Max Frame Size – The maximum frame size. (See
Support for Jumbo Frames" on page 5-3
maximum frame size for this switch
• MAC/PHY Configuration/Status – The MAC/PHY configuration and status
which includes information about auto-negotiation support/capabilities, and
operational Multistation Access Unit (MAU) type.
• PoE – Power-over-Ethernet capabilities, including whether or not PoE is
supported, currently enabled, if the port pins through which power is delivered
can be controlled, the port pins selected to deliver power, and the power class.
• MED TLVs – Configures general information included in the MED TLV field of
advertised messages.
• Capabilities – This option advertises LLDP-MED TLV capabilities, allowing
Media Endpoint and Connectivity Devices to efficiently discover which
LLDP-MED related TLVs are supported on the switch.
5-1.
Section 7-1: "IEEE 802.1Q VLANs" on page 7-1
7-19).
Section 7-1: "IEEE 802.1Q VLANs" on page 7-1
Section 5-1: "Displaying System Information"
7-19).
7-1).
7-19).
for information on configuring the
15-12
Section 7-1:
and Section 7-3:
and
Section 5-3: "Configuring