Supermicro SSE-G2252 User Manual page 415

Table 15-8. Supported Notification Messages (Continued)
Model
autoUpgradeTrap
swCpuUtiRisingNotification
swCpuUtiFallingNotification
swMemoryUtiRisingThresh
oldNotification
swMemoryUtiFallingThresh
oldNotification
swIpFilterInetRejectTrap
a. These are legacy notifications and therefore must be enabled in conjunction with
the corresponding traps on the SNMP C
Web Interface
To configure an SNMP group:
1. Click A
DMINISTRATION
2. Select C
ONFIGURE
3. Select A
DD
4. Enter a group name, assign a security model and level, and then select read, write,
and notify views.
5. Click A
PPLY
Level
1.3.6.1.4.1.10876.101
.202.2.1.0.104
1.3.6.1.4.1.10876.101
.202.2.1.0.107
1.3.6.1.4.1.10876.101
.202.2.1.0.108
1.3.6.1.4.1.10876.101
.202.2.1.0.109
1.3.6.1.4.1.10876.101
.202.2.1.0.110
1.3.6.1.4.1.10876.101
.202..2.1.0.111
> SNMP.
G from the S
ROUP
from the A list.
CTION
Chapter 15: Basic Administration Protocols
Group
This trap is sent when auto upgrade is executed.
This notification indicates that the CPU utilization
has risen from cpuUtiFallingThreshold to
cpuUtiRisingThreshold.
This notification indicates that the CPU utilization
has fallen from cpuUtiRisingThreshold to
cpuUtiFallingThreshold.
This notification indicates that the memory
utilization has risen from
memoryUtiFallingThreshold to
memoryUtiRisingThreshold.
This notification indicates that the memory
utilization has fallen from
memoryUtiRisingThreshold to
memoryUtiFallingThreshold.
This trap is sent when an incorrect IP address is
rejected by the IP filter.
menu.
ONFIGURATION
list.
TEP
15-41