SSE-G2252/SSE-G2252P Switches User's Manual
Displaying Connection Status
Use the Interface > P
connection status, including link state, speed/duplex mode, flow control, and
auto-negotiation.
CLI References
See
"show interfaces status" on page 27-15
Parameters
These parameters are displayed in the web interface:
•
Port – Port identifier.
•
Type – Indicates the port type. (100Base-TX, 1000Base-T, 100Base SFP or
1000Base SFP)
•
Name – Interface label.
•
Admin – Shows if the port is enabled or disabled.
•
Oper Status – Indicates if the link is Up or Down.
•
Media Type – Media type used.
(Options: RJ-45 – Copper-Forced;
Combination – Copper-Forced, SFP-Forced, or SFP-Preferred-Auto;
Default: RJ-45 – Copper-Forced; Combination – SFP-Preferred-Auto)
•
Autonegotiation – Shows if auto-negotiation is enabled or disabled.
•
Oper Speed Duplex – Shows the current speed and duplex mode.
•
Oper Flow Control – Shows if flow control is enabled or disabled.
Web Interface
To display port connection parameters:
1. Click I
NTERFACE
2. Select S
HOW
> G
ORT
ENERAL
> P
> G
ORT
ENERAL
I
from the Action List.
NFORMATION
(S
I
HOW
NFORMATION
for CLI reference information.
.
6-6
) page to display the current