Show Ip Access-List - Supermicro SSE-G2252 User Manual

Interface ethernet 1/2
IP access-list david in
SSE-G2252#
Related Commands
"ip access-group" on page 26-8

show ip access-list

This command displays the rules for configured IPv4 ACLs.
Syntax
show ip access-list {standard | extended} [acl-name]
standard – Specifies a standard IP ACL.
extended – Specifies an extended IP ACL.
acl-name – Name of the ACL. (Maximum length: 16 characters)
Command Mode
Privileged Exec
Example
SSE-G2252#show ip access-list standard
IP standard access-list david:
permit host 10.1.1.21
permit 168.92.0.0 255.255.15.0
SSE-G2252#
Related Commands
"permit, deny, redirect-to (Standard IP ACL)" on page 26-3
"ip access-group" on page 26-8
Chapter 26: Access Control Lists
26-9