Supermicro SSE-G2252 User Manual page 233

Parameters
These parameters are displayed in the web interface:
• Port – Displays the port number.
• Type – Indicates the port type. (100Base-TX, 1000Base-T, or SFP)
• Status – Enables or disables the rate limit. (Default: Disabled)
• Rate – Sets the rate limit level. (Range: 64 - 100,000 kbits per second for Fast
Ethernet ports; 64 - 1,000,000 kbits per second for Gigabit Ethernet ports)
Web Interface
To configure rate limits:
1. Click T > C
RAFFIC
2. Enable the R
ATE
3. Set the rate limit for the individual ports.
4. Click A .
PPLY
C
ONGESTION ONTROL
L S for the required ports.
IMIT TATUS
Figure 10-1. Configuring Rate Limits
10-3
Chapter 10: Congestion Control
> R L .
ATE IMIT