Lldp Basic-Tlv System-Capabilities - Supermicro SSE-G2252 User Manual

Syntax
[no] lldp basic-tlv port-description
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The port description is taken from the ifDescr object in RFC 2863, which includes
information about the manufacturer, the product name, and the version of the interface
hardware/software.
Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#lldp basic-tlv port-description
SSE-G2252(config-if)#

lldp basic-tlv system-capabilities

This command configures an LLDP-enabled port to advertise its system capabilities.
Use the no form to disable this feature.
Syntax
[no] lldp basic-tlv system-capabilities
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The system capabilities identifies the primary function(s) of the system and whether or
not these primary functions are enabled. The information advertised by this TLV is
described in IEEE 802.1AB.
Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#lldp basic-tlv system-capabilities
SSE-G2252(config-if)#
Chapter 39: LLDP Commands
39-9