Supermicro SSE-G2252 User Manual page 546

SSE-G2252/SSE-G2252P Switches User's Manual
• The Boot ROM and Loader cannot be uploaded or downloaded from the FTP/TFTP
server. You must follow the instructions in the release notes for new firmware, or
contact your distributor for help.
• When logging into an FTP server, the interface prompts for a user name and
password configured on the remote server. Note that "anonymous" is set as the
default user name.
Example
The following example shows how to download new firmware from a TFTP server:
SSE-G2252#copy tftp file
TFTP server ip address: 10.1.0.19
Choose file type:
1. config:
Source file name: m360.bix
Destination file name: m360.bix
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
SSE-G2252#
The following example shows how to upload the configuration settings to a file on the
TFTP server:
SSE-G2252#copy file tftp
Choose file type:
1. config:
Source file name: startup
TFTP server ip address: 10.1.0.99
Destination file name: startup.01
TFTP completed.
Success.
SSE-G2252#
The following example shows how to copy the running configuration to a startup file.
SSE-G2252#copy running-config file
destination file name: startup
Write to FLASH Programming.
\Write to FLASH finish.
Success.
SSE-G2252#
The following example shows how to download a configuration file:
SSE-G2252#copy tftp startup-config
TFTP server ip address: 10.1.0.99
Source configuration file name: startup.01
Startup configuration file name [startup]:
Write to FLASH Programming.
\Write to FLASH finish.
Success.
SSE-G2252#
SSE-G2252#copy tftp https-certificate
2. opcode: <1-2>: 2
2. opcode: <1-2>: 1
21-16