SSE-G2252/SSE-G2252P Switches User's Manual
ip domain-list
This command defines a list of domain names that can be appended to incomplete host
names (i.e., host names passed from a client that are not formatted with dotted
notation). Use the no form to remove a name from this list.
Syntax
[no] ip domain-list name
name - Name of the host. Do not include the initial dot that separates the host name
from the domain name.
(Range: 1-68 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
•
Domain names are added to the end of the list one at a time.
•
When an incomplete host name is received by the DNS service on this switch, it will
work through the domain list, appending each domain name in the list to the host
name, and checking with the specified name servers for a match.
•
If there is no domain list, the domain name specified with the
command is used. If there is a domain list, the default domain name is not used.
Example
This example adds two domain names to the current list and then displays the list.
SSE-G2252(config)#ip domain-list sample.com.jp
SSE-G2252(config)#ip domain-list sample.com.uk
SSE-G2252(config)#end
SSE-G2252#show dns
Domain Lookup Status:
DNS disabled
Default Domain Name:
sample.com
Domain Name List:
sample.com.jp
sample.com.uk
Name Server List:
SSE-G2252#
Related Commands
"ip domain-name" on page 40-4
40-2
ip domain-name